Home > Alternators > Alternator Powergen
Sort By:
Page of 1
PowerMaster PowerGen 5/8" Alternator Pulley PowerMaster PowerGen 3/8" Alternator Pulley PowerMaster PowerGen 1/2" Alternator Pulley
Chrome 5/8" Alternator Pulley fits 10Si and CS130 alternators.



PowerMaster PowerGen 3/8" Alternator Pulley

Alternator pulley for all PowerMaster PowerGen alternators

Black finish.

Installation Instructions
PowerMaster PowerGen 1/2" Alternator Pulley

Alternator pulley for all PowerMaster PowerGen alternators

Black finish.


Installation Instructions
PowerMaster PowerGen 5/8" Alternator Pulley PowerMaster PowerGen 3/4" Alternator Pulley PowerMaster PowerGen 3/8" Alternator Pulley
PowerMaster PowerGen 5/8" Alternator Pulley

Alternator pulley for all PowerMaster PowerGen alternators

Black finish.

Installation Instructions
PowerMaster PowerGen 3/4" Alternator Pulley

Alternator pulley for all PowerMaster PowerGen alternators

Black finish.
PowerMaster PowerGen 3/8" Alternator Pulley

Fits all PowerGen alternators, chrome finish
PowerMaster PowerGen 1/2" Alternator Pulley PowerMaster PowerGen 5/8" Alternator Pulley PowerMaster PowerGen 3/4" Alternator Pulley
PowerMaster PowerGen 1/2" Alternator Pulley

Fits all PowerGen alternators, chrome finish
PowerMaster PowerGen 5/8" Alternator Pulley

Fits all PowerGen alternators, chrome finish.

Installation Instructions
PowerMaster PowerGen 3/4" Alternator Pulley

Fits all PowerGen alternators, chrome finish.

Installation Instructions
PowerGen Alternator for Ford V8s PowerGen Alternator for 1949-1953 Flathead Ford PowerGen Alternator for 1939-1948 Flathead Ford V8
PowerGen Alternator for Ford V8s

Fits 1951-1958 all Ford engines, 1960-1964 Ford V8 only

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

Offset left hinge mounting, 12 volt, 90 amps, 3/8" pulley

Polished finish, order 82101 for black powder coated finish.

Thsi alternator comes with a 3/8" pulley installed, if you need a different width please select from the choices below.

PowerGen Alternator for Flathead Ford

Fits 1949-1953 Ford flatehead V8 engines, strap mounting.

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

12 volt, 90 amp output.


Polished finish, order 82021 for black powder coated finish

This alternator comes with a standard 5/8" installed, if you need a different width please select from the choices below.

Installation Instructions

PowerGen Alternator for Flathead Ford V8

Fits 1939-1948 Ford flathead V8s

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

90amp, 12 volt

Polished finish, for black powder coat finish order 82011.

This unit comes with the standard 5/8" pulley installed, if you need a different width please select from the choices below.

Installation Instructions

PowerGen 6 Volt Alternator for Ford V8s PowerGen Alternator for General Motors Vehicles (short) PowerGen Alternator for 1955-1957 Thunderbird
PowerGen 6 Volt Alternator for Ford V8s

Fits 1954-1955 all Ford engines

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

Offset left hinge mounting, 60 amps, 3/8" pulley

6 volts, positive ground

Polished finish, order 82106 for black powder coat finish.

This unit comes with the standard 3/8" pulley installed, if you need a different size please select from the choices below.

Installation Instructions

PowerGen Alternator for General Motors Vehicles (short, 6" field housing)

Fits pre-1964 General Motors vehicles without power steering

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

12 volt, 90 amps

Polished finish, for black powder coat finish order 82111

This unit comes with the standard 3/8" pulley installed, if you need a different width please select from the choices below.

Installation Instructions

PowerGen Alternator for 1955-1957 Thunderbird

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

90 amps, 12 volt


Polished finish, for black powder coat finish order 82155

This unit comes with the standard 1/2" pulley installed, for a different width please select from the choices below.

Installation Instructions

PowerGen Alternator for 1939-1948 Flathead Ford (short) PowerGen Alternator for General Motors Vehicles PowerGen 6 Volt Alternator for 1955 Thunderbird
PowerGen Alternator for Flathead Ford (1-1/2" shorter)

Fits 1939-1948 Ford flathead V8s

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

90 amps, 12 volt

Polished finish, for black powder coat finish order 82013

This unit comes with the standard 5/8" pulley installed, for a different width please select from the choices below.

Installation Instructions

PowerGen Alternator for General Motors Vehicles

Fits pre-1964 GM cars without power steering

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

Output: 12 volts, 90 amps, 60 amps at idle, polished finish.

Order 82051 for black powder coated finish.

This alternator comes with a standard 3/8" pulley already mounted, if you need a wider one select from the choices below.

Installation Instructions

PowerGen 6 Volt Alternator for 1955 Thunderbird

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

This alternator comes with the standard 1/2" pulley installed, if you need a different pulley, chose from the ones shown below.

90 amps, 6 volt, positive ground

Polished finish, for black finish, order 82156 shown below.

Installation Instructions

PowerGen 6 Volt Alternator for General Motors Vehicles PowerGen Alternator for 1949-1953 Flathead Ford (short) Ford PowerGen Swing Mount 6 Volt Positive Ground Alternator
PowerGen 6 Volt Alternator for General Motors Vehicles

Fits 1948-1954 GM cars without power steering

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

Output: 60 amps at idle, long (7.1" field housing) polished finish.

6 volts, negative ground

Order 82057 for black powder coat finish.

This unit comes with the standard 3/8" pulley, if you need a different size please select from the choices below.

Installation Instructions

PowerGen Alternator for Flathead Ford (short)

Fits 1949-1953 Ford flathead V8s (1-1/2" shorter)

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

12 volt, 90 amps, strap mounting


Polished finish, for black powder coat finish order 82023, for chrome finish order 182023

This unit comes with the standard 5/8" pulley installed, if you need a different width, please select from the choices below.

Installation Instructions

Ford PowerGen Swing Mount 6 Volt Positive Ground Chrome Alternator

Ford PowerGEN Swing Mount Alternator
  • Chrome
  • 60 Amp
  • 6 Volts
  • Positive Ground
  • 3/8" Pulley

    • Fits Applications:
    • 1958-1960
      EDSEL
      1951-1965
      FORD
      1952-1954
      LINCOLN


    Installation Instructions
    PowerGen Alternator for 1949-1953 Flathead Ford (short)
    PowerGen Alternator for Flathead Ford (short)

    Fits 1949-1953 Ford flathead V8s (1-1/2" shorter)

    The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

    12 volt, 90 amps, strap mounting


    Chrome finish, for black powder coat finish order 82023, for polished finish order 282023

    This unit comes with the standard 5/8" pulley installed, if you need a different width, please select from the choices below.

    Installation Instructions