Home > Alternators > Alternator Pulleys
Sort By:
Page of 1
PowerMaster PowerGen 5/8" Alternator Pulley PowerMaster PowerGen 3/8" Alternator Pulley PowerMaster PowerGen 1/2" Alternator Pulley
Chrome 5/8" Alternator Pulley fits 10Si and CS130 alternators.



PowerMaster PowerGen 3/8" Alternator Pulley

Alternator pulley for all PowerMaster PowerGen alternators

Black finish.

Installation Instructions
PowerMaster PowerGen 1/2" Alternator Pulley

Alternator pulley for all PowerMaster PowerGen alternators

Black finish.


Installation Instructions
PowerMaster PowerGen 5/8" Alternator Pulley PowerMaster PowerGen 3/4" Alternator Pulley PowerMaster PowerGen 3/8" Alternator Pulley
PowerMaster PowerGen 5/8" Alternator Pulley

Alternator pulley for all PowerMaster PowerGen alternators

Black finish.

Installation Instructions
PowerMaster PowerGen 3/4" Alternator Pulley

Alternator pulley for all PowerMaster PowerGen alternators

Black finish.
PowerMaster PowerGen 3/8" Alternator Pulley

Fits all PowerGen alternators, chrome finish
PowerMaster PowerGen 1/2" Alternator Pulley PowerMaster PowerGen 5/8" Alternator Pulley PowerMaster PowerGen 3/4" Alternator Pulley
PowerMaster PowerGen 1/2" Alternator Pulley

Fits all PowerGen alternators, chrome finish
PowerMaster PowerGen 5/8" Alternator Pulley

Fits all PowerGen alternators, chrome finish.

Installation Instructions
PowerMaster PowerGen 3/4" Alternator Pulley

Fits all PowerGen alternators, chrome finish.

Installation Instructions
PowerGen Alternator for Ford V8s PowerGen Alternator for 1949-1953 Flathead Ford PowerGen Alternator for 1939-1948 Flathead Ford V8
PowerGen Alternator for Ford V8s

Fits 1951-1958 all Ford engines, 1960-1964 Ford V8 only

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

Offset left hinge mounting, 12 volt, 90 amps, 3/8" pulley

Polished finish, order 82101 for black powder coated finish.

Thsi alternator comes with a 3/8" pulley installed, if you need a different width please select from the choices below.

PowerGen Alternator for Flathead Ford

Fits 1949-1953 Ford flatehead V8 engines, strap mounting.

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

12 volt, 90 amp output.


Polished finish, order 82021 for black powder coated finish

This alternator comes with a standard 5/8" installed, if you need a different width please select from the choices below.

Installation Instructions

PowerGen Alternator for Flathead Ford V8

Fits 1939-1948 Ford flathead V8s

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

90amp, 12 volt

Polished finish, for black powder coat finish order 82011.

This unit comes with the standard 5/8" pulley installed, if you need a different width please select from the choices below.

Installation Instructions

PowerGen 6 Volt Alternator for Ford V8s PowerGen Alternator for General Motors Vehicles (short) PowerGen Alternator for 1955-1957 Thunderbird
PowerGen 6 Volt Alternator for Ford V8s

Fits 1954-1955 all Ford engines

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

Offset left hinge mounting, 60 amps, 3/8" pulley

6 volts, positive ground

Polished finish, order 82106 for black powder coat finish.

This unit comes with the standard 3/8" pulley installed, if you need a different size please select from the choices below.

Installation Instructions

PowerGen Alternator for General Motors Vehicles (short, 6" field housing)

Fits pre-1964 General Motors vehicles without power steering

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

12 volt, 90 amps

Polished finish, for black powder coat finish order 82111

This unit comes with the standard 3/8" pulley installed, if you need a different width please select from the choices below.

Installation Instructions

PowerGen Alternator for 1955-1957 Thunderbird

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

90 amps, 12 volt


Polished finish, for black powder coat finish order 82155

This unit comes with the standard 1/2" pulley installed, for a different width please select from the choices below.

Installation Instructions

PowerGen Alternator for 1939-1948 Flathead Ford (short) PowerGen Alternator for General Motors Vehicles PowerGen 6 Volt Alternator for 1955 Thunderbird
PowerGen Alternator for Flathead Ford (1-1/2" shorter)

Fits 1939-1948 Ford flathead V8s

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

90 amps, 12 volt

Polished finish, for black powder coat finish order 82013

This unit comes with the standard 5/8" pulley installed, for a different width please select from the choices below.

Installation Instructions

PowerGen Alternator for General Motors Vehicles

Fits pre-1964 GM cars without power steering

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

Output: 12 volts, 90 amps, 60 amps at idle, polished finish.

Order 82051 for black powder coated finish.

This alternator comes with a standard 3/8" pulley already mounted, if you need a wider one select from the choices below.

Installation Instructions

PowerGen 6 Volt Alternator for 1955 Thunderbird

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

This alternator comes with the standard 1/2" pulley installed, if you need a different pulley, chose from the ones shown below.

90 amps, 6 volt, positive ground

Polished finish, for black finish, order 82156 shown below.

Installation Instructions

PowerGen 6 Volt Alternator for General Motors Vehicles Ford PowerGen Swing Mount 6 Volt Positive Ground Alternator
PowerGen 6 Volt Alternator for General Motors Vehicles

Fits 1948-1954 GM cars without power steering

The PowerGEN from Powermaster provides the classic look of a generator with the output and reliability of a modern alternator, and it offers the ease of one-wire hook up. Powermaster has engineered the PowerGEN from the ground-up and uses completely brand new, and high-tech materials throughout it’s construction.

Output: 60 amps at idle, long (7.1" field housing) polished finish.

6 volts, negative ground

Order 82057 for black powder coat finish.

This unit comes with the standard 3/8" pulley, if you need a different size please select from the choices below.

Installation Instructions

Ford PowerGen Swing Mount 6 Volt Positive Ground Chrome Alternator

Ford PowerGEN Swing Mount Alternator
  • Chrome
  • 60 Amp
  • 6 Volts
  • Positive Ground
  • 3/8" Pulley

    • Fits Applications:
    • 1958-1960
      EDSEL
      1951-1965
      FORD
      1952-1954
      LINCOLN


    Installation Instructions