Home > Shop by Product > Conversion Kits 12 Volts >

1949-1953 Ford Mercury Flathead V8 12V Conversion Kit
1949-1953 Ford Mercury Flathead V8 12V Conversion Kit


 
Our Price: $398.95


Availability:: In Stock
Product Code: F4953612K


The following items are included with this product:


Vehicle Options

Heater Motor Reducer*:

Vehicle

Year Vehicle*:


CAR/TRUCK*:

Alternator Amperage

AMPERAGE*:

Alternator Pulley Width (Measure Top of Belt)

SELECT PULLEY WIDTH*:

Important we know the correct width of the existing generator V belt pulley. Measure the top of the existing generator belt and select.

Qty:  
Description Reviews
 
1949-1953 Ford Mercury Flathead V8 Car / Truck 12V Conversion Kit.

Included in conversion kit. 12 volt 63 amp or optional 100 amp alternator your choice of 3/8' or 5/8" pulley, flathead V8 bracket that mounts the alternator in the same position as the original generator. Ignition Coil, Headlight Relay, Horn Relay, Oil Gas Temp Gauge Regulator (allows use of original 6v gauge sending units), (Start Solenoid that is both ground and power activated allows the use of the original stater button, alternator plug and 8' of 10 AWG alternator to battery connection wire. Set of Instructions.

This kit converts vehicle from positive to negative ground. Consider ordering optional battery cables as they are made to fit and super high quality.

Note: Most 1949 cars and trucks used 5/8" pulleys, 1950-53 generally were
3/8" pulleys.

See optional items below.

1 Year Warranty Made In USA


Add These Options To The Kit Simply Check the Item
Airtex Electric Fuel Pump KIt 12 Volts Carburetor Engines Borg Warner R10-R11 Overdrive 12 volt Upgrade Kit Heavy Duty Turn Signal Switch 12 Volts 1949-1951 Ford Battery Cables
Our Price: $129.95

Add
Our Price: $522.95

Add
Our Price: $43.85

Add
Our Price: $74.95

Add
Airtex Electric Fuel Pump KIt 12 Volts Carburetor Engines Borg Warner R-10 R11 12 volt Upgrade Kit Heavy Duty Turn Signal Switch 12 Volts 1949-1951 Ford Battery Cables
1949-1950 Ford F1 - F8 Truck Battery Cables Ford Flathead High Torque Starter Power Master American Autowire Power Plus 20 Universal Wiring Kit Vintage Tube Radio Reducer 12 volts to 6 volts
Our Price: $64.95

Add
Our Price: $269.95

Add
Our Price: $339.95

Add
Our Price: $54.95

Add
1949-1950 Ford F1 - F8 Truck Battery Cables Ford Flathead High Torque Starter Power Master American Autowire Power Plus 20 Universal Wiring Kit 12V to 6V Vintage Tube Radio Dropping Reducer
1949-1953 Ford Mercury Flathead V8 Electronic Ignition 1951 Ford 6 Cylinder Truck Battery Cables Alternator Output Wire Fuse 80 amps OVERDRIVE SOLENOID REDUCER-RELAY 12 VOLTS TO 6 VOLTS
Our Price: $109.95

Add
Our Price: $38.95

Add
Our Price: $28.95

Add
Our Price: $299.95

Add
1949-1953 Ford Flathead V8 Electronic Ignition 1951 Ford 6 Cylinder Truck Battery Cables Fuse Alternator Power Wire In-Line 80 amps OVERDRIVE SOLENOID REDUCER-RELAY 12 VOLTS TO 6 VOLTS, ALSO POWERS WINDOWS SEATS TOP MOTORS
12 volt to 6 Volt Electric Window and Seat Reducer Universal Stock Look Spark Plug Wire Set 8 cylinder 90 Degree Boots Heater Blower Motor Reducer 12 volt to 6 volts Airtex Electric Fuel Pump 12V Carburetor Engines
Our Price: $179.95

Add
Our Price: $59.95

Add
Our Price: $21.95

Add
Our Price: $39.95

Add
12 volt to 6 Volt Window Top Seat Reducer Universal Spark Plug Wire Set for V8 Stock Look Heater Blower Motor Reducer 12 volt to 6 volts Airtex Electric Fuel Pump 12V Carburetor Engines 2.5 to 4.5 PSI
1952-1953 Ford Battery Cables Turn Signal Flasher 550 3 Pin 12 volt Alternator Output Wire Fuse 125 Amps
Our Price: $57.95

Add
Our Price: $9.95

Add
Our Price: $28.95

Add
1952-1953 Ford Battery Cables Turn Signal Flasher 550 3 Pin 12 volt Fuse Alternator Power Wire In-Line 125 Amps

Average Rating: 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Great company to order from October 17, 2018
Reviewer: Dennis D from WA  

I always get the right products for the right price at the right time. and the install of the conversion kit was so easy.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
1949 ford truck conversion 12 volts February 2, 2017
Reviewer: Bobby T from Dallas Tx  
I found this site and man was i glad to meet these folks, i had search for a complete parts list to convert my 49 truck to 12 volts, i called and these guys know there stuff, asked me a few question, order was placed and within a few days 3 to be exact i got this well packed box of parts, the instruction were simple to follow and my truck started right up. i was concerned about using my original gauges, these guys have this nifty VREG that runs all the gauges on 12 volts.  great product!!!!!!

Was this review helpful to you?